Re: 93 Accord Lx Water pump Location? -- Honda Accord Message Board

[ Show ]

Support VoyForums

[ Shrink ]

VoyForums Announcement: Programming and providing support for this service has been a labor of love since 1997. We are one of the few services online who values our users' privacy, and have never sold your information. We have even fought hard to defend your privacy in legal cases; however, we've done it with almost no financial support -- paying out of pocket to continue providing the service. Due to the issues imposed on us by advertisers, we also stopped hosting most ads on the forums many years ago. We hope you appreciate our efforts.

Show your support by donating any amount. (Note: We are still technically a for-profit company, so your contribution is not tax-deductible.) PayPal Acct: Feedback:

Donate to VoyForums (PayPal):

[ Login ] [ Contact Forum Admin ] [ Main index ] [ Post a new message ] [ Search | Check update time | Archives: 1, 2, 3, 4, 5 ]

Subject:

Re: 93 Accord Lx Water pump Location?

Author:
David (OH YEA!!!!!!! Here It IS!!!!!)

[ Next Thread | Previous Thread | Next Message | Previous Message ]

Date Posted: 19:37:22 02/02/07 Fri
Author Host/IP: adsl-69-235-218-75.dsl.irvnca.pacbell.net/69.235.218.75
In reply to: Robbie 's message, "93 Accord Lx Water pump Location?" on 01:08:07 02/08/04 Sun

HONDA ACCORD 1990-1995 WATER PUMP REPLACEMENT
(DO NOT ATTEMP TO DO THIS IF YOU DO NOT KNOW HOW TO ADJUST TIMING!!!) YOU WILL DESTROY YOUR ENGINE!!!(Must Have A Professional Do this Part)

1. Jack up Driver Side of Car and remove Tire And Splash Shields Located Behind Tire(its The flimsey black plastic thats all dirty)

2.Disconnect the Negative Battery Cable (Black)

3.Turn Engine to alighn the Timing Marks and set cylinder number 1 to TDC on the Compression Stroke.
Once in this position, the Engine must "NOT" be turned or distributed.

4. drain engine coolant

5.Remove Timing Belt and Cover(round wheel belt fits on)

6.remove Bolts holding water pump in place;pay speciall attention to the Locations of these bolts they are langer and shorter and must be placed in proper order.

7.remove water pump and o-ring.

INSTALLING THE NEW PUMP

8.Replace o-ring and install water pump.
make certain the o-ring does not deform or move out of place, Tighten mounting bolts to 9ft.Lbs.(12Nm)
on the Accord V-6 tighten the 8mm bolts to 16ft.Lbs. (22Nm)
and the 6mm Bolts to 9ft. Lbs. (12Nm)

9.Install the Timming belt Cover/Wheel and belt

10. Refil With Engine Coolant 50%Coolant then 50%Water

11.Reconnect Negative Battery Cable (Black)

12. Start Engine and allow it to Idle (about five minutes You will hear the car sound like it is going to die and then speed up and then die then speed up then it will Idle,(dont worry its normal) Look for any Leekage under the Vehicle, And Listen for Any Belt Slapping on the Covers,
Then Bleed And Flush The Coolant System Bottle of Flush is $10 bucks.

Turn Off The Engine , Reinstall Splash Shield And Tire And You Are All Done!!!!! Happy Driving!!!!!!!!

[ Next Thread | Previous Thread | Next Message | Previous Message ]