Show your support by donating any amount. (Note: We are still technically a for-profit company, so your
contribution is not tax-deductible.)
PayPal Acct:
Feedback:
Donate to VoyForums (PayPal):
[ Login ] [ Contact Forum Admin ] [ Main index ] [ Post a new message ] [ Search | Check update time | Archives: 1 ] |
Subject: ![]() |
|
Author: squirrel | [ Next Thread |
Previous Thread |
Next Message |
Previous Message
] Date Posted: 06:03:22 01/23/03 Thu In reply to: turbo_lebaron 's message, "car won't start please help!" on 10:13:17 01/18/03 Sat It's possible the noise you heard was the Bendix drive( the little gear that engages to the flywheel) in the starter staying engaged and hitting the flywheel. This would explain noise than no noise then no start. Replacing the starter is not that hard. I'd try tightening the bolts to the converter too, but I doubt that is where you problem lies they just don't pop out one day and then go away the next. I've been wrong before though. [ Next Thread | Previous Thread | Next Message | Previous Message ] |
[> Subject: Re: car won't start please help! | |
Author: tonyz2897 [ Edit | View ] |
Date Posted: 12:28:52 01/23/03 Thu He got it started. I've been talking to him on AIM. The thing now is that he says it's making an aweful screeching noise. Even though those shields are extremely thin, do you think it's possible that without it something is rubbing? I told him to check and see if anything appeared shiny like it had been rubbing somewhere. Any ideas? Tony [ Post a Reply to This Message ] |
[> [> Subject: Re: car won't start please help! | |
Author: squirrel [ Edit | View ] |
Date Posted: 13:02:10 01/23/03 Thu If that shield is off it shouldn't make a difference. If he pryed on the shield between the bellhousing and the engine than it verywell could be rubbing. There should be plenty of clearence unless the starter or a shield is missaligned. [ Post a Reply to This Message ] |
[> [> [> Subject: ![]() |
|
Author: tonyz2897 [ Edit | View ] |
Date Posted: 15:16:22 01/23/03 Thu He's got it now. The bellhousing bolts were still loose!!?? He tightened them up and it quieted down. Now he says he's having a problem with it trying to take off from a stop in third occasionally (a413). Valvebody? Governor? Low line pressure? Any ideas? Tony [ Post a Reply to This Message ] |